vPress the shutter release button.

The image will be displayed on the LCD monitor for 0.5 seconds (Instant Review) and recorded on the CF card. When the image seen through the lens is displayed on the LCD monitor, you can take the next picture.

Using the Shutter Release Button

The shutter release button works in a two-step action.

●Press halfway

When the shutter release button is pressed lightly (halfway), the focus, exposure and white balance are locked. The following information is displayed on the LCD monitor.

Start Quick

qFocusing area

If the subject is in focus, the frame will light green. If the subject is not in focus, the frame will light red.

wFlash symbol

The flash symbol indicates the

status of the flash when the shutter release button is pressed.

eAperture and shutter speed set- tings

2

 

200

1/1600

7/30/2001

F2.8

11:19

31

The aperture and shutter speed settings are usually displayed in white. If the image is under- or over-exposed, they are displayed in orange.

●Pressed down fully

When the shutter release button is pressed fully from the halfway position, the picture is taken.

Instant Review

The Instant Review default setting is 0.5 seconds. During this time you can delete the image.

Changing the Instant Review Time p.50

Erasing Images p.58

19