Pentax Optio 43WR Changing the Start-upScreen

Changing the Start-up Screen

You can display an image recorded with the camera as the welcome screen when the camera is turned on.

1

2

Select [Screen Setting] on the [B Set-up] menu. Press the four-way controller (5).

The Screen Setting screen will be displayed.

3	Press the four-way controller (5).
			Change Start-up
	The screen for changing the start-up screen		Start-up Screen
4	will be displayed.
	Press the four-way controller (45)			Optio
	to select O (On) or P (Off).
			Image		MENU Exit OK OK
	O	Displays the start-up screen.
	P	Does not display the start-up screen.

5 Press the b button.

6 Use the four-way controller (45) to select the image you want to display as the start-up screen.

7 Press the OK button 4 times.

The camera is ready for capture or playback.

Once the start-up screen has been set, it will not be erased even if the original image is deleted or the SD Memory Card is formatted. To delete the start-up screen, reset the setting. (1p.107)

9 CameraSettings

103