112
3/24/2005
12:00

2, 3

1

Using the Self-Timer

In self-timer mode, the picture is taken ten seconds or two seconds after the shutter release button is pressed.

1 Press the four-way controller (2) in Capture mode to display g or r on the LCD monitor.

2 Press the shutter release button halfway.

The focus frame on the LCD monitor will light green when the camera is in focus.

3 Press the shutter release button fully.

gThe self-timer is engaged and the self-

timer lamp lights for about seven seconds. The picture is taken

approximately three seconds after the self-timer lamp starts to blink.

rThe self-timer is engaged and the picture is taken approximately two seconds after the self-timer lamp starts to blink.

Focusing may be compromised if you move the camera while the self-timer is running.

•The countdown is displayed when you press the shutter release button.

•To cancel the self-timer, press the MENU button while the second count is displayed.

Taking Pictures of Yourself 1p.52

Troubleshooting “Subject is not in focus” 1p.157

4 TakingPictures

63