Problem | Cause | Remedy | |
|
| Lock focus on another object located at | |
| Subject is difficult to | same distance (press shutter release | |
| focus on with | button halfway), then aim at target and | |
| autofocus | press shutter release button fully (p.41), | |
|
| or use Manual Focus mode. (p.82) | |
|
| Position subject in focus frame in middle | |
Subject is not in |
| of LCD monitor. If the subject is outside | |
Subject is not in | the focusing area, aim the camera at the | ||
focus | |||
subject and lock the focus (press shutter | |||
| focusing area | ||
| release button halfway), then compose | ||
|
| ||
|
| picture and press the shutter release | |
|
| button fully. | |
| Subject is too close | Set focus mode to q. (p.81) | |
| Focus mode is set to q | Normal pictures will be out of focus if | |
| taken with focus mode set to q. | ||
| Flash mode is set to a | Set to Auto or b (Flash On). (p.83) | |
| (flash off) |
| |
Flash does not | Drive mode is set to 1 |
| |
or c |
| ||
discharge | Focus mode is set to | Flash will not discharge in these modes. | |
| s | ||
|
| ||
| Shooting mode is set |
| |
| to C or y |
| |
USB connection |
|
| |
with computer | USB connection mode | Change the USB connection mode to | |
does not work | is set to [PictBridge] | [PC]. (p.159) | |
properly |
|
| |
USB connection | USB connection mode | Change the USB connection mode to | |
with printer does | |||
is set to [PC] | [Pictbridge]. (p.139) | ||
not work properly |
9 Appendix
175