1 GettingStarted
Powering the Camera
Remove the battery cover | Insert the battery |
2 | Serial number |
| |
| 3 |
1 |
|
Battery cover button | Battery tape |
*The serial number can be found on the camera once the battery cover has been removed.
Installing the Battery
The battery for this camera is included in the package. Insert the battery in the camera and then place the camera on the USB cradle to charge the battery.
1 Press the battery cover button on the side of the LCD monitor.
Swivel the lens section of the camera to expose the battery cover button.
2 Hold the button down and slide the battery cover in the direction of the arrow.
Remove the battery cover from the camera.
Do not pull the battery cover up with too much force while sliding it off. Doing so may damage the battery cover.
3 Insert the battery so that the 2symbol is pointing toward the lens.
Make sure that the battery tape protrudes from between the camera and the battery. The battery tape is useful for removing the battery and should not be pushed out of sight under the battery.
16