4 Close the battery cover.

Slide the cover on from the SD Memory Card socket side of the camera and push until it clicks.

The battery cover fits on the camera so that the “X” of the PENTAX logo on the cover is nearest the lens.

Removing the Battery

1 Remove the battery cover.

Refer to Steps 1 and 2 on the previous page.

2 Pull the battery tape to lift the battery up.

Lift the battery out of the camera.

•This camera uses a rechargeable lithium-ion battery D-LI8. Use of any other type of battery may damage the camera and cause malfunction.

•Insert the battery correctly. If the battery is incorrectly oriented, malfunction may result.

•Do not remove the battery while the camera is turned on.

•If you do not intend to use the camera for a long time, remove the battery.

•If the camera is left without the battery for a long time, the date will be reset.

1 GettingStarted

17