4 TakingPictures

8, 9

 

3,

7

1

2,

4, 5, 6

Rq<IA >;SBJKE\

Automatically Changing the Shooting Conditions (Auto Bracket)

Auto bracketing can be used to automatically vary settings such as the exposure and white balance over a series of three shots when the shutter release button is pressed. This simple operation ensures that you are able to get the best shots after shooting.

Auto Bracket Settings

a

 

Pictures are taken in the following sequence: normal,

Exposure

underexposed (dark), overexposed (bright). Choose the

 

 

bracketing steps from 0.3, 0.7, 1.0, 1.3, 1.7 and 2.0. (1p.63)

 

 

Conditions change in the following sequence: normal, red

b

White Balance

tinge (low color temperature), blue tinge (high color

 

 

temperature). Choose the bracketing steps from 1, 2, 3, 4 and

 

 

5. (1p.82)

d

Sharpness

Conditions change in the following sequence: current setting,

– (soft), + (hard). (1p.89)

 

 

c

Saturation

Conditions change in the following sequence: current setting,

– (low), + (high). (1p.90)

 

 

e

Contrast

Conditions change in the following sequence: current setting,

– (low), + (high). (1p.91)

 

 

1 Press the {button in Amode.

The Fn guide appears.

2 Use the four-way controller (2) to select a.

The icon corresponding to the current setting appears, and then the setting appears for five seconds.

To take pictures with the displayed setting, go to Step 8.

Current Setting

Exposure 0.3EV

OK Change Setting

68