3 Press the 4 button while the setting is displayed.

The Auto Bracket options screen appears.

4 Use the four-way controller (23) to choose the shooting conditions.

Auto Bracket

Exposure

0.3EV

White Balance

1

Sharpness

 

Saturation

 

Contrast

 

MENU Cancel

OK OK

5 Press the four-way controller (5) to choose the Auto Bracket settings for aor b.

A pull-down menu appears.

6 Use the four-way controller (23) to choose the bracketing steps.

7 Press the 4 button.

38

The camera is ready to take pictures. The function chosen for auto bracketing appears on the LCD monitor.

8 Press the shutter release button

09/25/2004

halfway.14:25

The focus frame turns green if the subject is in focus.

9 Press the shutter release button fully.

•Three pictures are taken in succession when a is selected and the shutter release button is pressed down fully in Step 9.

•Only one picture is taken when any other auto bracket option is selected and the shutter release button is pressed down fully in Step 9, and the camera creates the series of three shots internally.

•Auto bracketing is not possible in F, C or ^ mode.

•The flash will not discharge in Auto Bracket mode.

•When recorded pixels is set to [2048×1536] and above, images are taken at [D (Better)] despite quality level set at [C (Best)].

•The Auto Bracket options screen in Step 3 above can also be displayed from the [A Rec. Mode] menu.

•With the exception of the shooting conditions selected for auto bracketing, the second and third pictures are taken under the same conditions as the first picture.

4 TakingPictures

69