Disconnecting the Camera from your PC

Windows 2000 / Me

1 Double-click the [Unplug or eject hardware] icon in the task bar recognized area.

The [Unplug or Eject Hardware] screen will appear.

2 Confirm that [PENTAX USB DISK Device] is selected and click [Stop].

The [Stop a Hardware device] screen will appear.

3 Confirm that [PENTAX USB DISK Device] is selected and click [OK].

A message will appear.

4 Click [OK].

5 Turn off the camera and disconnect the USB cable from your camera and PC.

• If the camera (removable disc) is being used by an application such as ACDSee, the camera cannot be disconnected until the application is closed.

•In the event that an error message is displayed in Step 4, confirm that the viewfinder lamp is not blinking and then disconnect the camera.

14