Peripheral Electronics PGHGM3 Selecting AUX Input, Tune Down, Seek Down, Changing Bands

Tune Down

Turn the rotary tune knob to the left to manually tune down.

Seek Down

Press the “SEEK \/” button to seek down to next available station.

Changing Bands

To switch between AM and FM bands, press Preset #5 to toggle between AM and FM modes.

Store Presets

To Store a station into the Preset memory, tune to the station, press Preset #2 to enter the preset menu. Turn the tune knob to select the preset loca- tion (1-18) where you wish to store the preset. When the preset position is displayed (for example PRE1) press “SEEK \/” to store the preset into memory.

The screen will display “PR SAVED” and your preset has been stored into memory.

Recall Presets

To recall a preset saved in memory, press Preset #2 to enter the preset menu. Turn the tune knob to scroll through the stored preset stations. When the desired preset is displayed, press the “SEEK /\” button to select it.

Exit preset menu

To leave the preset menu simply wait 10 seconds. After 10 seconds of inactivity the media gateway will automatically exit the menu.

Changing Display:

Press the “Disp” button to display artist and song information if the current HD Radio station is transmitting that information.

Steering wheel controls

If the vehicle is equipped with Steering wheel controls, Press the “/\” button to seek up to the next station. Press the “\/” button to seek down to the next station.

8. Selecting AUX Input

Entering Mode Select Menu

Leave and re-enter the SAT mode to enter the mode select menu. This can be accomplished by pressing the BAND button a few times until XM is displayed on the screen. Once in the Mode Select Menu, turn the rotary tune knob to scroll through available sources. Once “Aux 1” or “Aux 2” is displayed, press Preset #2 to select the displayed mode.