5. Installation

1.When making electrical connections it is always recommended that the vehicle’s battery be disconnected from the electrical system before performing the installation.

2.Carefully remove the trim panels covering the 10mm bolts that secure the radio into the dash cavity. Remove these bolts, and carefully pull the radio from the dash of the vehicle. This will provide access to the factory radio connectors where you will connect the Media Gateway harness.

3.Disconnect the factory 12-Pin harness (if present) from the back of the radio. Disconnect the antenna from the radio.

4.Connect the 8-Pin iPod docking cable into the first port on the Media Gateway

(farthest away from dipswitches). Carefully run the 11 foot iPod cable behind the dash to the location where the iPod will be mounted or stored (for example the glove box or center console). This location will vary based on the vehicle, and the customer’s prefrence. When running this cable through the dash be sure to secure it away from moving parts or sharp metal edges that may damage the cable.

5.If connecting the HD Radio Tuner (HDRT sold separartely), make the folllowing connections before connecting the PXAMG to the vehichle. Plug the 3 foot HD Radio Cable (8-Pin mini-din to 8-Pin mini-din) cable into the second port (closest to the dipswitches) on the Media Gateway. Connect the other end of this cable into the HD Radio tuner. Connect the factory antenna cable into the antenna connection on the HD Radio tuner (HDRT).

NOTICE:

After removing the radio, if there are two antenna leads connected into the back of the radio, your vehicle is equipped with a diversity antenna system. When connecting the HDRT follow these steps to provide ensure the best performance of the HD Radio Tuner. If you do not feel comfortable making these connections you will need to purchase the PGHTYHD harness (sold separately).

1.Locate factory Power antenna wire in radio’s wiring harness. This wire will be in Pin location #18 (See Diagram)

2.Cut this wire about 2 inches from the back of the radio.

3.Carefully remove about ½ an inch of insulation from the wire on the VEHICLE’S side. (Not the wire connecting into the radio)

4.Locate the accessory wire Pin location # 20 (See diagram)

5.About 2 inches away from the radio carefully remove about ½ an inch of insulation from this accessory wire.

6.Connect the vehicle’s side of the Power antenna wire(stripped) to the accessory wire. (solder this connection to ensure the best connection possible)

7.Insulate this new connection on the Accessory wire to prevent an electrical short

Page 5 Page 7
Page 6
Image 6
Peripheral Electronics PGHTY1 owner manual Installation
Page 5 Page 7

PGHTY1 specifications

The Peripheral Electronics PGHTY1 is an advanced gaming hub designed to enhance the overall gaming experience through cutting-edge technology and innovative features. It is specifically engineered to provide high performance while maintaining seamless connectivity between numerous gaming peripherals.

One of the main features of the PGHTY1 is its multi-device compatibility. It effortlessly connects to various gaming tools, including controllers, keyboards, mice, and headsets, ensuring that gamers have the flexibility to customize their setup according to their preferences. Its plug-and-play functionality enables users to quickly link their devices without extensive configuration hassles.

The PGHTY1 is equipped with an array of advanced technologies that make it stand out in the competitive gaming accessories market. It incorporates low-latency communication technology that minimizes input delay, providing gamers with instantaneous responses to their commands. This is crucial for competitive gaming where fractions of a second can determine the outcome of a match.

Another noteworthy aspect of the PGHTY1 is its robust audio enhancement capabilities. Integrated with advanced sound processing technologies, it provides immersive audio experiences, allowing gamers to hear every nuanced detail within their environments. This auditory precision significantly enhances situational awareness during gameplay, giving users a competitive edge.

Durability and ergonomic design are also central to the PGHTY1’s appeal. Constructed from high-quality materials, it is designed to withstand the rigors associated with prolonged gaming sessions. Its ergonomic layout ensures that users can connect and disconnect devices comfortably and efficiently, reducing strain during use.

Additionally, the PGHTY1 often features customizable lighting and macro functions. Gamers have the ability to personalize their devices with an array of colors and patterns, creating a visually appealing gaming environment. The macro capabilities allow users to program complex actions into a single button, simplifying intricate tasks in games.

In summary, the Peripheral Electronics PGHTY1 is a high-performance gaming hub that stands out due to its multi-device compatibility, low-latency communication, superior audio processing, durable construction, ergonomic design, and customization options. This makes it an essential accessory for gamers seeking to enhance their setup and elevate their gaming performance.
Top Page Image Contents