Perle Systems C-100-XXXXX Overview ,

Fast Ethernet Media Converter – Installation Guide 2
Overview
This document contains instructions necessary for the installation and
operation of the Perle Fast Ethernet Media Converter Module(s) (C-100
and CM-100) that are used in conjunction with a Perle MCR Chassis.
The C-100 are unmanaged media converter modules, and the CM-100
are the managed versions. These products convert a 100Base-T cable
connection (copper) to a 100Base-X connection (fiber). The fiber
connection can be either single mode (SM) or multimode (MM) and can
operate over different wavelengths and distances, depending on the
model selected (see table below). For information on the management
options of the CM-100 module, refer to the MCR-MGT Module User’s
Guide.
Model Connector Mode - Distance Wavelength
C-100-M2xx2
CM-100-M2xx2
SC/ST/LC MM - 2 km/1.2 mi. 1310 nm
C-100-S2xx20
CM-100-S2xx20 SC/ST/LC SM - 20 km/12.4 mi. 1310 nm
C-100-S2xx40
CM-100-S2xx40
SC/ST/LC SM - 40 km/24.9 mi. 1310 nm
C-100-S2xx80
CM-100-S2xx80 SC/ST/LC SM - 80 km/49.7 mi. 1550 nm
C-100-S2xx120
CM-100-S2xx120
SC/ST/LC SM - 120 km/74.6 mi 1550 nm
C-100-S1SC20U
CM-100-S1SC20U
SC SM - 20 km/12.4 mi. 1310/1550 nm
C-100-S1SC20D
CM-100-S1SC20D
SC SM - 20 km/12.4 mi. 1550/1310 nm
C-100-S1SC40U
CM-100-S1SC40U
SC SM - 40 km/24.9 mi. 1310/1550 nm
C-100-S1SC40D
CM-100-S1SC40D SC SM - 40 km/24.9 mi. 1550/1310 nm
Note: Please refer to Perle’s web site for the most up to date
Installation guides, models and specifications:
http://www.perle.com/