Perle Systems S-110P, S-110P-SFP, S-110PP, S-110PP-SFP manual

P/N 5500318-12

Perle PoE/PoE+

10/100 Ethernet

Media Converters

Installation Guide

S-110P

S-110PP

S-110P-SFP

S-110PP-SFP

Contents

Main Overview POE/POE+ Installation Power Sourcing Pinouts UTP (copper) Power PoE PoE+ Powering Options Jumper Settings DIP Switches Bank 1 Bank 2 DIP Switch Settings Bank 1 Auto-negotiation (copper) (Switch 1) Link Pass-Through Mode (Switch 2) Link Pass-Through Behaviour Far End Fault (Switch 3) PSE Enable Copper (Switch 4 and 5) PD Power Reset (Switch 6) Loopback Fiber (Switch 7) Bank 2 Speed Copper (Switch 1) Duplex Copper (Switch 2) Duplex Fiber (Switch 3) Auto/MDIX (Switch 4) Installing the SFP Fiber Module Installing the Duplex Fiber Cable Installing the Simplex Fiber Cable Installing the Copper Cable Attaching the Power Cord Strain Relief Clip Powering up the Perle Media Converter Operation Status LED LED Pattern Page Other Features Auto-MDIX Pause (IEEE 802.3xy) Troubleshooting General No connectivity Method 1 Method 2: No Power to the PD Technical Specifications The following applies to all S-110P media converters: Fiber Optic Specifications: Fiber Cabling Requirements: http://www.perle.com/ MM: 50/125 microns or 62.5/125 microns SM: 9/125 microns Ethernet Copper Cabling Requirements: Compliance Information FCC EN 55022, Class A EN 55024, Class A Laser Safety IEC 60825-1:2007 Warranty / Registration Contacting Technical Support