Perlick BSDZ Reversing Door Hinge, Tools Required, Operations to Perform on Door, Step

Step #12

Step #11

Step #13

Reversing Door Hinge

Tools Required

■#3 Phillips Screwdriver.

■1/16” Allen Wrench.

■Flathead Screwdriver

Right Hinged Door

(as shipped from factory)

Handle Styles

STEP 8:

Re-assemble hinge brackets to unit. Bottom right brack- et is assembled as the top left bracket. Top right bracket is assembled as the bottom left bracket.

STEP 9:

Re-insert top hinge pin.

STEP 10:

Re-assemble lock rail from Bottom Hinge Bracket Top Hinge Bracket

STEP #3

Operations to Perform on Door

C31409-1 65305-1

STEP 11:

Step #14

	Not
	Reversible
65609-2	65189

Operations to Perform on Cabinet

STEP 1:

Remove bottom hinge pin from assembly.

Remove bottom door hinge bracket from door assem- bly and remove door hinge bushing from bracket. Re-assemble door hinge bracket to previous position,

without bushing.

STEP 2:

Carefully lift and tilt out door assembly from the unit and set aside.

STEP 3:

Remove lock rail from cabinet, requires removal of four screws.

STEP 4:

Remove top hinge pin. Remove top and bottom hinge brackets from the unit.

Remove these screws

STEP 12: Remove top door hinge bracket from door assembly and

assemble door hinge bushing from

STEP 11 to bracket. Re-assemble door hinge bracket to previous position with bushing attached.

STEP 13:

Door with full length SS handle:

There is no need to remove door handle. It will be positioned correctly when door is reversed.

Door with SS pull tab or handle with wrap- around bracket:

STEP 5:
Remove hinge bushing from
bottom hinge bracket and	Top Hinge Bracket Bottom Hinge Bracket
assemble to top hinge bracket.

Remove the two screws mounting the handle and reposition to appropriate location on the opposite side of the door.

STEP 6:

Taking care not to scratch the surface, remove hole plugs

from the left hinge holes.

STEP 7:

Insert hole plugs into vacant right hinge holes.

Hinge Bushing

Step #7

Step #6

STEP 14:

Remove lock retainer and install on opposite end of door.

STEP 15:

What was the door top is now the door bottom. Carefully lift the door onto the hinge brackets of the cabinet. The two hinge bushings should meet. Reinsert the bottom hinge pin to complete the door switching operation.

	Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
Form No. Z2304	6
Rev. 05.22.10