washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, etc.

5.Rack / Wall / Ceiling Mounting

The AVP1 should be rack mounted only in a heavy-duty rack or stand that is recommended for audio equipment use. Mounting to a wall or ceiling should be via a heavy-duty bracket or shelf designed for audio equipment use.

6.Heat

The AVP1 should be situated away from heat sources such as radiators, stoves, or other appliances that produce excessive amounts of heat.

7.Power Sources

The AVP1 should be connected to mains power supply only of the type described in the operating instructions, or as marked on the rear of the AVP1

8.Power Cord Protection

The mains power supply cord should be routed so that it is not likely to be walked on or pinched by items placed on or against it. Pay particular attention to the cord at power points, convenience receptacles, and the point where it exits from the AVP1.

9.Cleaning

When cleaning any Perreaux product use lukewarm water with a few drops of mild detergent.

DO NOT USE SOLVENTS.

10.Non-use Periods

The mains power cord of the AVP1 should be unplugged from the

mains/line outlet when the unit is to be left unused for long periods of time.

11.Object and Liquid Entry

Care should be taken so that objects and/or liquids do not accidentally fall inside the AVP1.

12.Damage Requiring Service

Qualified service personnel should service the AVP1 if any of the following occur:

a.The mains power-supply cord, and/or plug have been damaged

b.Objects have fallen, or liquid has been spilt into the AVP1

c.The AVP1 has been exposed to rain and/or excessive moisture

d.The AVP1 does not appear to operate normally, or exhibits a marked change in performance

e.The AVP1 has been dropped, or the chassis damaged.

13.Servicing

The user should not attempt to service the AVP1 beyond those means described in the owners’ manual. All other servicing should be referred to qualified service personnel.

14.Grounding or Polarisation Precautions should be taken so that the grounding or polarisation of the AVP1 are correct, and are maintained throughout the entire system.

IMPORTANT INFORMATION

Always make sure the attenuator / volume control of your AVP1 or source unit is set to –80dB and the mains/line supply disconnected from your AVP1 prior to

performing any switching functions or connection alterations of any type to your AVP1, or to any other part of your entire system. This caution also applies to the normal use of your Laser Disc player, Tuner, Cassette Deck, etc.

PRODUCT SUPPLIED WITHOUT MAINS PLUG

If your unit comes with a 3-core cable but without a plug, make certain LIVE and NEUTRAL leads are connected correctly to your plug terminals.

IMPORTANT: The wires of the mains/line lead in this unit are coloured in accordance with the following code:

BROWN

LIVE

BLUE

NEUTRAL

GREEN/YELLOW

 

EARTH/GROUND

As the wire colours in the mains lead of this unit may not correspond exactly with those coloured markings on the terminals of your plug proceed as follows:

-The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N, or colour coded BLUE or BLACK.

-The wire which is coloured BROWN must be connected to the terminal which is marked with the letter P or L, or colour coded BROWN or RED.

-The wire which is coloured GREEN/YELLOW must be connected to the terminal which is marked with the letter E, or colour coded GREEN/YELLOW or GREEN.

NOTE: Any modifications to the mains/line voltage setting within your AVP1 may only be carried out by a

3