1 |
| Unpacking and Placement | |
|
| The E160 is packaged for maximum protection. Please carefully read the | |
|
| ||
|
| instructions below before proceeding to unpack the unit. Be extremely careful. | |
Unpacking |
| à Inspect both ends of the cardboard box and open at the end without the | |
Procedure |
| central staple by slitting the reinforced tape at either side. | |
|
| à Fold back the flaps and tip the package on end and the inner box will | |
|
| slide out. | |
|
| à Lay the inner box down flat and upright, open it conventionally by | |
|
| separating the top tray from the bottom. | |
|
| à The product can now be removed from the bottom packaging. This will | |
|
| be easier if you have someone to help you by holding the base of the | |
|
| box. | |
|
| à Alternately, the bottom tray and amplifier could be tipped upside down | |
|
| and the bottom packaging removed. If opened in this manner, please | |
|
| ensure that you turn the contents over again. | |
Note: |
| ||
| Be very careful to secure the unit if you are planning to flip the package |
| |
|
| upside down. | |
|
|
|
|
|
| à Remove the two white polystyrene protectors off either side of the | |
|
| amplifier, leaving the black material covering. | |
|
| à Pull back the material and remove the protective black tissue from the | |
|
| front panel. | |
|
| The amplifier is now unpacked and ready for further installation. | |
Note: |
|
|
|
| Please retain all packaging material for future transport. |
| |
Box | 1 x E160 Power amplifier | ||
Contents | 1 x E160 Product manual | ||
|
| 1 x Detachable AC power cord | |
Placing | The E160 should generally be placed close to your source component, keeping | ||
Your E160 | the interconnect cabling short. | ||
|
| We strongly recommend keeping the E160 on it’s own separate shelf to allow | |
|
| for proper ventilation. | |
7