11Specifications
Specifications in Brief
The correlation between published specifications and sonic quality can be unreliable. A list of numbers reveals virtually nothing. All technical measurements must be subject to qualitative as well as quantitative interpretation. Measurements of the SXH2 reveal excellent results by any standards. Tested at 115V and 230V after a 10 minute warm up period.
Rated Power Output (per channel) | 2.0WRMS into 32Ω |
........................................................................ | 1.0WRMS into 64Ω |
.................................................................. | 215mWRMS into 300Ω |
Voltage Swing | |
Input Sensitivity | 1.45VRMS |
Maximum Gain | 15.0dB |
Gain Adjustment: |
|
Low Setting | |
High Setting | 0dB |
Input Impedance | 50kΩ |
Total Harmonic Distortion (THD+N): |
|
Typically | 0.001%, @ 1kHz into 64Ω |
20Hz to 20kHz | <0.005% |
Frequency Response | |
Signal to Noise Ratio: |
|
Rated Output (unweighted) | 105dB |
Dynamic Headroom (rated with music) | >3.0dB |
Power Consumption: |
|
Idle | 500mW |
Maximum (at 3.5W per channel into 8Ω) | 8.0W |
Audio Connections |
|
Inputs | 1 pair line level (RCA) |
Outputs | 1 pair line level (RCA) |
......................................2 stereo headphone jacks (6.35mm, ¼”)
Other Connections
IEC AC mains input receptacle
Mains Input Voltage
115V or 230V AC at 50Hz/60Hz
(Set within the SXH2 at time of manufacture)
20
