Specifications:
Input sensitivities for rated output of 1.2V RMS
into 10kΩ |
|
Auxiliary and tape inputs | ....................... 80mV RMS |
Magnetic phono 1 | 2.5mV RMS @ lkHz |
Magnetic phono 2 ......2.6mV RMS @ lkHz variable
Input overload |
|
|
Auxiliary and tape inputs | ......................... | 4.0V RMS |
Magnetic phono 1 and 2 | 110mV RMS | |
Rated output | 1.2V RMS (No. 1 output) | |
........................ | ||
Maximum output capability | 7V RMS | |
Frequency response over all amp and headphone | ||
amp |
|
|
Auxiliary input |
Phono input (R.I.A.A.
Total harmonic distortion | 0.02% |
(typically 0.009% at 1kHz) | |
Intermodulation distortion | 0.005% |
(S.M.P.T.E. 50Hz or 6kHz @ 4:1) | |
Noise measured on 20Hz to 20kHz bandwidth | |
Minimum volume | |
(Lin reference rated output) | |
Maximum volume auxiliary | |
(Lin reference rated output) | |
Maximum volume phono | |
(Lin reference rated output) | |
Maximum volume phono | |
(Lin reference 10mV input) | |
Tone controls |
|
Bass | +15dB |
Midrange | +9dB |
Treble | +15dB |
Loudness shelving type | +7dB at 50Hz |
.......................................................... | +7dB at 15kHz |
;Schematic diagram : Product manual
Filters |
|
|
Low 6dB per octave |
|
|
from 40Hz | ||
High 6dB per octave |
|
|
from 2kHz |
Total semiconductor compliment
12 IC's (Highspeed low noise, unity gain at 38MHz and wide bandwidth)
16Transistors
8Diodes
8Zener Diodes
1Bridge Rectifier
Mains voltage | 230/115 volts AC |
Front panel | 19 inch rack mount |
Inputs/Outputs | R.C.A. cinch connectors |
.................................................. | DIN for tape 1 and 2 |
Headphone Amplifier:
Operating Mode | Class A |
Rated Power 0.25 watts RMS both channels driven into 8 ohms from 20Hz to 20kHz at no more than 0.025% total harmonic distortion.
Maximum Power 0.5 watts RMS both channels driven into 8 ohms from 20Hz to 20kHz at no more than 0.04% total harmonic distortion.
Maximum power at 1kHz 1.0 watts RMS both channels driven into 8 ohms with no more than 0.04% total harmonic distortion.
Noise 20Hz to 20kHz |
|
Minimum volume | |
(Lin reference rated output) | |
Maximum volume auxiliary | |
(Lin reference rated output) | |
Maximum phono | |
(Lin reference rated output) | |
Maximum volume phono |
(Lin reference 10mV input)
info@perreaux.com | www.perreaux.com |