1Unpacking and Placement

Unpacking The SXH2 is packaged for maximum protection. To open, sit the Procedure box upright and cut the reinforced tape at the top of the box. The

product can now be removed.

Pull the foam protecting end-caps off either side of the unit and remove the black material covering.

The SXH2 Headphone amplifier is now unpacked and ready for further installation.

Note: Please retain all packaging material for future transport.

Box 1 x SXH2 Headphone amplifier Contents 1 x Product manual

3 x Performance analysis charts

1 x Detachable AC power cord

Placing Your The SXH2 should generally be placed close to your source SXH2 equipment, thus keeping interconnect cabling between the SXH2 and associated components as short as practical. This will reduce the systems susceptibility to radio frequency interference and the

negative effects associated with long cables.

Ventilation The SXH2 is a low power amplifier. Ventilation requirements Requirements are not considered an important factor in product placement.

In the event that the SXH2 is to be incorporated into custom cabinetry, please refer to the dimensional information provided in the Physical Dimensions section of the manual (Chapter 12).

6