Manuals / Brands / Lawn and Garden / Electric Pet Fence / Petsafe / Lawn and Garden / Electric Pet Fence

Petsafe PIF00-12917 Congratulations! You have now successfully completed the training program.

1 28

Download 28 pages, 2.71 Mb

www.petsafe.net 19

Days 15 thru 30 - Pet Monitoring

Your pet is ready to run! Check in on your pet at regular intervals.

Note: After you are satisﬁed your pet’s training is complete, remove every other

Boundary Flag every 4 days until all ﬂags are removed. Save Boundary Flags for

future use.

Taking Your Pet Out of the Pet

Area

Important: Remove the Receiver Collar and leave it in the Pet Area.

Once your pet learns the Boundary Zone, he will be reluctant to cross it for walks

or car rides.

Option 1: Replace the Receiver Collar with a regular collar.

Put your pet in a car that is within the Pet Area and drive him

out of the Pet Area.

Option 2: Replace the Receiver Collar with a regular collar

and leash. Walk your pet out of the Pet Area while giving a

command such as “OK” at a speciﬁc place of the Boundary

Zone (the end of your driveway, sidewalk, etc.). Always leave the

Pet Area with a leash at this place and your pet will associate

leaving the Pet Area only on a leash, only at this place, and only

with a person. You may initially need to convince your pet to

leave the Pet Area with a food treat and lots of praise.

Note: You may also carry your pet out of the Pet Area.

Congratulations! You have now successfully completed the training program.

Phase

5

Contents

Main 2 1-800-732-2677 www.petsafe.net 3 Important Safety Information Explanation of Attention Words and Symbols used in this guide www.petsafe.net 3 Table of Contents Operating Guide Training Guide Frequently Asked Questions Troubleshooting Components Other Items You May Need PET AREA 6 1-800-732-2677 www.petsafe.net 7 How the System Works Key Definitions Receiver Collar Operating Guide Set Up the Transmitter 1A 1B Charge the Receiver Collar 2A 3C Prepare the Receiver Collar Turning the Receiver Collar ON Receiver Collar Status Indicators Receiver Collar Status Indicator Table To Set the Static Correction Level Function and Response Table Over Correction Protection Adjust the Pet Area to Desired Size Test Light Instructions 4A 4B Two-Person Method Transmitter Range Chart Record Your Settings Place the Boundary Flags 5A 5B Fit the Receiver Collar 6A 6B 6C To Re-Thread the Collar Training Guide Be Patient With Your Pet Day 1 - Boundary Awareness Tone Only Training Mode 1A 1B 1C Days 2 thru 4 - Continue Boundary Awareness Introduction to Static Correction Days 5 thru 8 - Distraction Phase Days 9 thru 14 - Unleashed Supervision Days 15 thru 30 - Pet Monitoring Taking Your Pet Out of the Pet Area Congratulations! You have now successfully completed the training program. Wireless-To-Go Accessories Frequently Asked Questions Page Troubleshooting Page Page Terms of Use and Limitation of Liability Compliance FCC/Canada Australia Customer Care International Mounting Template