Petsafe PIG00-10777 manual

Model Number

PIG00-10777

stubborn dog

in-ground fence™

operating and training guide

Please read this entire guide before beginning

Contents

PIG00-10777 Important Safety Information Explanation of Attention Words and Symbols used in this guide Page Table of Contents Components Other Items You May Need How the System Works Key Definitions Operating Guide Step Locate the Fence Transmitter Step Lay Out the System 2Basic Planning Tips Sample Layouts Double Loop Step Position the Boundary Wire To Splice or Repair the Boundary Wire Additional Boundary Wire Step Connect the Wires to the Fence Transmitter Boundary Wire (4A) Surge Protection Prepare the Receiver Collar To Insert and Remove the Battery To Set the Static Correction Level Anti-LingerPrevention Run Through Prevention Step Set the Boundary Width and Test the Receiver Collar Page Step Install the Boundary Wire To Bury the Boundary Wire To Attach the Boundary Wire to an Existing Fence To Cross Hard Surfaces (driveways, sidewalks, etc.) Step Place the Boundary Flags Step Fit the Receiver Collar To Re-Threadthe Collar Training Guide Be Patient With Your Pet PhaseDay 1 - Boundary Awareness 1Tone Plus Vibration Training Mode PhaseDays 2 thru 4 - Continue Boundary Awareness 2Introduction to Static Correction PhaseDays 5 thru 8 - Distraction Phase PhaseDays 9 thru 14 - Unleashed Supervision PhaseDays 15 thru 30 - Pet Monitoring Taking Your Pet Out of the Pet Area Accessories Troubleshooting Additional Information System Test Transmitter Loop Test Wire Break Location Test Terms of Use and Limitation of Liability Compliance FCC/Canada Australia Customer Care International Layout Grid