Input
6.02 Examples of how to create a seam program
6.02.01 Example of a seam program input with the "creating/adjusting a program" function
The program to be created should
-have 3 seam sections and
-be stored under the program number "4" with the comment "PROG".
Seam area 1
Number of stitches: 40
Fullness: 0
Seam area 2
End with knee switch
Fullness: 20
Seam area 3
Without stitch count
End with pedal position
Fullness: 0
●Switch on the machine.
● Call up the input mode.
● Call up the "creating/adjusting a seam program" function and enter program number "4".
● Set the seam type (right seam) by pressing until the appropriate symbol appears.
● Call up the menu for comment input.
●Enter the comment "PROG" with the keyboard and number panel.
● Conclude the comment input.
● Change to the input of the first seam section.
36