CM1001d

In-Ceiling Speaker

Technical Information for System Engineers

Frequency Response

110.0

dBSPL

100.0

90.0

80.0

70.0

60.0

 

 

20

100

1K

Phase/Impedance Reponse

50.0

 

 

Impedance

Ohm

Phase

 

40.0

 

30.0

 

20.0

 

10.0

 

0.0

 

10

100

1K

180.0

Deg

108.0

36.0

-36.0

-108.0

-180.0

10K Hz 20K

252.0

Deg

180.0

108.0

36.0

-36.0

-108.0

10K Hz 20K

Entertainment innovations are protected by mul- tiple U.S. & international patents, which explicitly cover SoundTube dome, enclosure and dispersion technologies. SoundTube Entertainment actively defends its patents in order to protect SoundTube resellers and end users.

Technical Data and

Specification Tools

Technical Data

SoundTube Entertainment strives to provide complete and effective technical information and data to dealers, engineers and designers. All data are available from SoundTube Enter- tainment or at www.soundtube.com.

Data Acquisition

All performance data acquired at SoundTube’s Technical Measurement Center (TMC) are analyzed using a variety of standard measure- ment techniques, including Measured Length Sequence (MLS) and Time Delay Spectrometry (TDS). Performance, development and data acquisition tools include: Gold Line TEF 20, CLIO, LMS, LEAP, and proprietary modeling software. EASEdata are acquired through an automated CLIO/Outline/EASEinterface.

EASE™ Data 3-D polar plots.

SoundTubeSPEC™ – Proprietary SoundTube speaker placement software.

Architectural Specifications

The loudspeaker shall consist of a 254 mm (10.0 in) low-frequency transducer with a frequen- cy-dividing network installed in the vented enclo- sure. The low-frequency voice coil diameter shall be 35.0 mm (1.38 in).

Performance specifications of a typical produc- tion unit shall be as follows: Useable frequency response shall extend from 40 Hz – 300 Hz (-10 dB, half space, no external equalization). Measured sensitivity (1 watt, 1 meter) shall be at least 93.5 dB. The speaker shall have a nominal imped- ance of 4 Ohms and be available for 25, 70.7 & 100 Volt modes with voice coil/4 Ohm direct. The frequency-dividing network shall have a crossover frequency of 100 Hz with a 6 dB per octave (1st order) slope for the low pass filter. Rated power capacity shall be at least 150 Watts continuous power (RMS) and conform to EIA-426-B testing. Maximum continuous output at 1 meter shall be 115.5 dB.

Installation for the CM1001d shall be by 2-screw blind-mount, constant-tension winged assembly and shall attach to ceiling thickness tolerances ranging from 6.4 mm (0.25 in) to 42.9 mm (1.69 in). The fixed-wing assembly shall be constructed of iridite-plated, powder coated steel. The external

Technical data, EASEplots, SoundTubeSPECsoftware & product downloads available at www.soundtube.com

Page 2
Image 2
Phase Technology CM1001d specifications Technical Data Specification Tools, Architectural Specifications

CM1001d specifications

The Phase Technology CM1001d is a remarkable speaker designed to deliver exceptional audio performance while accommodating modern home theater setups. With a sleek and contemporary design, this speaker fits seamlessly into various environments, from simple living rooms to elaborate media rooms.

At the heart of the CM1001d are its impressive technical specifications. It features a 1-inch aluminum dome tweeter that ensures crisp highs and detailed sound reproduction, enhancing the listening experience for music and movies alike. This tweeter is complemented by a 6.5-inch woofer that provides robust mids and powerful bass response. The synergy between these components offers a well-balanced sound profile, making it suitable for various genres and content types.

One of the standout technologies in the CM1001d is its advanced Waveguide System. This innovative technology allows for a broader dispersion of sound, enabling listeners to enjoy consistent audio quality regardless of their position in the room. This makes it an ideal choice for larger spaces, where typical speakers may struggle to deliver uniform sound.

The CM1001d also incorporates Phase Technology’s proprietary U.S. Registered Patent Design. This design minimizes unwanted resonances while maximizing efficiency, allowing the speaker to produce high output levels without distortion. The cabinet construction is another highlight, featuring a sturdy and acoustically inert enclosure that minimizes vibrations, resulting in clearer and more accurate sound playback.

Connectivity options further enhance the CM1001d's appeal. It is compatible with a range of audio sources, making it versatile for use in various audio setups. Its compatibility with both wired and wireless systems ensures that users have the flexibility to integrate it into their existing home theater or music system effortlessly.

Finally, the Phase Technology CM1001d is engineered for durability and longevity. With high-quality materials and robust construction techniques, this speaker is built to withstand years of use while maintaining optimal performance.

In summary, the Phase Technology CM1001d is a powerful and versatile speaker that combines advanced technologies with a stylish design to provide an impressive listening experience. It is an excellent choice for audiophiles seeking clarity and performance, making it a valuable addition to any audio setup.