CM500i |
|
Technical Information for System Engineers |
Specifications: CM500i
System Type
Frequency Response (- 3 dB)1
Low Frequency
Max. Program Power
Max. Continuous Power RMS2
Max. UL Power Rating3
Max. SPL dB @ 1 M
Sensitivity dB @ 1W/1M4
Impedance (nominal)
Coverage Angle
Coverage Angle
Directivity Factor (Q)
Directivity Index (DI)
Tap Selector
Transformer Taps
Tile bridge included
5.25” Coax,
78 Hz - 22 kHz
55 Hz - 22 kHz
150Watts
75Watts
50Watts 107.5 dB 88.5 dB
8 Ohm (nominal value) 140º 105º
4.82 (Averaged 100 Hz - 10 kHz); 5.78 @ 2 kHz
6.21 dB (Averaged 100 Hz - 10 kHz); 7.62 dB @ 2 kHz
Key Features
• BroadBeam® waveguide technology |
delivers a consistent dispersion pattern |
up to 10 kHz for maximum coverage |
area per speaker (EASE™ documented). |
• One 133 mm (5.25 in) polypropylene |
woofer and one 25 mm (1.0 in) convex |
aluminum tweeter with FerroFluid™ |
cooling mounted to a proprietary cast- |
aluminum M5™ baffle and heat sink. |
• Rapid installation |
wing mounting mechanism with con- |
stant tension design affixing to ceiling |
thickness tolerances ranging from 6.4 |
mm (0.25 in) to 42.9 mm (1.69 in). |
• Separate |
bezel assembly for ease of install & |
• |
tive |
durability. |
• Easy access |
switch for 25, 70.7 and 100 Volt applica- |
70.7 V | Output | 100 V | Output | 25 V | Output |
33 W | 105.5 dB | 33 W | 105.5 dB | 5 W | 97.5 dB |
17 W | 103.0 dB | 17 W | 103.0 dB | 2.5 W | 94.5 dB |
9 W | 100.0 dB | 9 W | 100.0 dB | 1.3 W | 91.5 dB |
6 W | 98.5 dB | 6 W | 98.5 dB | 0.63 W | 88.5 dB |
3 W | 95.5 dB |
|
|
|
|
Transducers |
|
Low Frequency Driver | 1 x 133 mm (5.25 in) Polypropylene cone, butyl rubber surround |
High Frequency Driver | 25 mm (1.0 in) Convex aluminum tweeter with waveguide |
Low Frequency Voice Coil | 25 mm (1.0 in) |
Crossover Frequency | 3 kHz |
Network Type |
|
tions with voice coil/8 Ohm direct sim- |
plifies ordering & inventory tracking. |
• 88.5 dB average sensitivity offers high- |
output capabilities & reduced amplifica- |
tion costs. |
• UL 1480 rev. 5 & 2043, CE (EMC Direc- |
tive 89/366/EEC, EN55020, EN55013 & |
IEC529 approval pending. Milspec 810 |
approved. |
• Included accessories: Tile bridge, |
Euroblock connector & paint mask. |
Low Pass
High Pass
Enclosure Material
Motor Board
Grille
Inputs
Colors
Backcan Diameter
Backcan Height
Visible Diameter
Visible Height
Weight
Shipping Weight
Accessories
Included
Optional
Packaging
12 dB per octave, 2nd order
12 dB per octave, 2nd order
Drawn aluminum backcan with ABS baffle
Cast aluminum
4 Pin, 5 mm Euroblock for individual or daisy chain connection
Black or white
219.2mm / 8.63 in
197 mm / 7.75 in
271.9mm / 10.71 in
24.5mm / .96 in
3.4kG / 7.5 lbs
10.7kG / 23.5 lbs (2 per box, includes tile bridges)
Tile bridge, Euroblock connector & installation aid
Junction Box
2 Per box
• Optional accessories: |
Bracket, Junction Box and Square Grille |
for architectural specifications. |
• |
finish. Custom paint colors optional. |
Description
The CM500i is a 5.25”
1Frequency response is measured in half space and includes a
2 Continuous power rating,
3 UL testing specifies
SoundTube continually develops new product innovations and improvements. Updates to existing products without prior notice are an example of SoundTube’s drive for constant improvement.
board,
© 2005 SoundTube Entertainment. All rights reserved. PN