|
|
Technical Information for System Engineers |
Specifications: CM82- |
|
| Tile bridge included | |
EZ | ||||
|
| |||
System Type | 8" Coax, |
| ||
|
|
| 25/70.7/100 Volt or 16 Ohm direct) |
|
Impedance (nominal) 1 | 16 ohm |
| ||
Sensitivity dB @ 2.83V/1M | 88.3 dB |
| ||
Sensitivity dB @ 1W/1M 2 | 91.3 dB |
| ||
Frequency Response (- 3 dB) 3 | 90 Hz - 22 kHz |
| ||
Frequency Response | 45 Hz - 22 kHz |
| ||
Max. Program Power 4 | 128 w |
| ||
Max. Continuous Power RMS 5 | 64 w |
| ||
Max. Power SPL @ 1 M 6 | 109.4 dB | |||
Coverage Angle | 110º |
| ||
Coverage Angle | 50º |
| ||
Coverage Angle | 80º (Avg. 2 - 10 kHz) |
| ||
Directivity Factor (Q) | 4.2 (Avg. 100 Hz - 10 kHz) ; 4.3 (2 kHz) |
| ||
Directivity Index (DI) | 5.6 dB (Avg. 100 Hz - 10 kHz) ; 6.3 DB (2 kHz) |
| ||
Tap Selector |
| |||
Transducer - Low Frequency Driver | 203 mm (8 in) Polypropylene cone, butyl rubber surround |
| ||
Transducer - High Frequency Driver | 25 mm (1in) Silk tweeter |
| ||
Low Frequency Voice Coil | 25.4 mm / 1.00 in |
| ||
Crossover Frequency | 5.0 kHz |
| ||
Network Type: Low Pass | 6 dB per octave, 1st order |
| ||
Network Type: High Pass | 6 dB per octave, 1st order |
| ||
Enclosure Material | Drawn steel backcan with ABS baffle |
| ||
Grille |
| |||
Inputs |
| |||
Colors | Black or white |
| ||
Backcan Diameter | 9.67 in / 245.6 mm |
| ||
Backcan Height | 5.75 in / 146.1 mm |
| ||
Visible Diameter | 11.75 in / 298.5 mm |
| ||
Visible Height | 0.34 in / 8.6 mm |
| ||
Mounting Hole Diameter | 10.50 in / 266.7 mm |
| ||
Min / Max Ceiling Thickness | 0.035 in / 0.9 mm – 1.60 in / 40.6 mm |
| ||
Weight | 9.0 lb |
| ||
Shipping Weight | 10.0 lb | |||
Accessories |
|
| ||
Included | Tile bridge, UL listed flex conduit clamp, paint shield cutout | |||
|
|
| template, wire nuts |
|
Optional |
| |||
Packaging | 1 per box |
| ||
Regulatory - UL | Approved 2043 & 1480 |
| ||
Regulatory - CE | Approved |
| ||
1 Impedance listed per IEC | Transformer Taps |
|
Preliminary Technical Information
Key Features
•One 203 mm (8 in) polypropylene woofer with cloth surround and one 25.4 mm (1.0 in) silk tweeter.
•Reduced amplification costs and maxi- mum efficiency 91.3 dB sensitivity, 16 Ohm impedance and a sealed enclosure.
•Superior voice intelligibility with an average coverage angle of 77° (Indepen- dently verified, 2 – 10 kHz).
•
•Incorporates a painted steel grille for lasting durability.
•UL 1480 & 2043, cUL, CE (EMC Direc- tive 89/366/EEC, EN55020, EN55013) approved.
•Adaptable to material thicknesses rang- ing from 0.04 in (0.9 mm) to 1.60 in (40.6).
•Included accessories: Tile bridge, UL listed 0.5” conduit clamp, paint shield & 2 wire nuts.
•Optional accessories:
•
Description
The
Mounting hardware is included and features a
21w1m sensitivity determined using nominal impedance
3Frequency response measured in half or full space as dictated by speaker mounting configuration
4Max program power is 3 dB above max continuous power
5Continuous power rating,
5Max output based on max continuous power
6Max useable SPL based on testing by NWAA Labs
70.7 V Output
64 w 109.5 dB
32 w 106.5 dB
16 w 103.5 dB
8 w 100.5 dB
100 V Output
64 w 109.5 dB
32 w 106.5 dB
16 w 103.5 dB
25 V Output
8 w 100.5 dB
4 w 97.5 dB
2 w 94.5 dB
1 w 91.5 dB
application. For easy ordering, stock- ing and installation, this series includes
a
© 2008 SoundTube Entertainment. All rights reserved.