Phase Technology XT610 Enclosure Technology, Technical Data, Data Acquisition, Frequency Response

XT610

Outdoor/In-Ground Speaker

Technical Information for System Engineers

Frequency Response
110.0					180.0
	Half space (2p)
dBSPL					Deg
100.0					108.0
90.0					36.0
80.0					-36.0
70.0					-108.0
			2p simulates mounted or in-ground applications.
60.0					-180.0
30	100	1K	10K	Hz	20K
Phase/Impedance Reponse
50.0					180.0
	Impedance
Ohm	Phase				Deg
40.0					108.0
30.0					36.0
20.0					-36.0
10.0					-108.0
0.0					-180.0
20	100	1K	10K	Hz	20K

Enclosure Technology

XT enclosures are engineered for maxi- mum durability and performance. Unlike other outdoor speakers, SoundTubes incor- porate patented ZeroReflection™ internal shaping to create the most effective envi- ronment for sound reproduction. The result is accurate sound and tight bass in

an indestructible enclosure.

Technical Data

SoundTube Entertainment strives to pro- vide complete and effective technical infor- mation and data to dealers, engineers and designers. All data are available from SoundTube Entertainment or at www.soundtube.com.

Technical data and downloads include:

Tech Sheets – Technical information and architectural specs for system engineers.

Data Acquisition

All performance data acquired at SoundTube’s Technical Measurement Center (TMC) are analyzed using standardized mea- surement techniques, including Measured Length Sequence (MLS) and Time Delay Spectrometry (TDS). Performance, develop- ment, and data acquisition tools include: Gold Line TEF20 Suite, CLIO, LMS, LEAP, and proprietary modeling software.

Data for Other SoundTube Products

Also available: Sales & installation infor- mation for all SoundTube speaker systems, including open-ceiling, in-ceiling, surface- mount, in-ground and sound-focusing speakers.

Architectural Specifications

The loudspeaker shall be of in-ground design consisting of one 130 mm (5.25 in) low-frequency transducer and one 25 mm (1.0 in) silk dome high-frequency trans- ducer with a frequency-dividing network installed in a vented enclosure. The low- frequency voice coil diameter shall be 25 mm (1.0 in).

Performance specifications of a typical production unit shall be as follows: Usable frequency response shall extend from

60 Hz – 20 kHz. The loudspeaker shall be available in separate 32W transformer and

4 Ohm models. Taps shall be nominally 4 W

Technical data, EASE™ plots, SoundTubeSPEC™ software & product downloads available at www.soundtube.com