Phase Technology XT800 specifications Outdoor/In-GroundSpeaker, Technical Data, Data Acquisition

XT800

Outdoor/In-Ground Speaker

Technical Information for System Engineers

Frequency Response
100.0					180.0
	Half space (2p)
dBSPL					Deg
90.0					108.0
80.0					36.0
70.0					-36.0
60.0					-108.0
			2p simulates mounted or in-ground applications.
50.0					-180.0
30	100	1K	10K	Hz	20K
Phase/Impedance Reponse
100.0					180.0
	Impedance
Ohm	Phase				Deg
80.0					108.0
60.0					36.0
40.0					-36.0
20.0					-108.0
0.0					-180.0
20	100	1K	10K	Hz	20K

environment for sound reproduction. The result is accurate sound and tight bass in an indestructible enclosure.

Technical Data

SoundTube Entertainment strives to pro- vide complete and effective technical infor- mation and data to dealers, engineers and designers. All data are available from SoundTube Entertainment or at www.soundtube.com.

Technical data and downloads include:

Tech Sheets – Technical information and architectural specs for system engineers.

Data Acquisition

All performance data acquired at SoundTube’s Technical Measurement Center (TMC) are analyzed using standardized mea- surement techniques, including Measured Length Sequence (MLS) and Time Delay Spectrometry (TDS). Performance, develop- ment, and data acquisition tools include: Gold Line TEF 20 Suite, CLIO, LMS, LEAP, and proprietary modeling software.

Data for Other SoundTube Products

Also available: Sales & installation infor- mation for all SoundTube speaker systems including open-ceiling, in-ceiling, surface- mount, in-ground and sound-focusing speakers.

Architectural Specifications

The loudspeaker shall be of in-ground design consisting of one 203 mm (8.0 in) low-frequency transducer and one 25 mm (1.0 in) high-frequency transducer with a frequency-dividing network installed in a vented enclosure. The low-frequency voice coil diameter shall be 40 mm (1.6 in).

Performance specifications of a typical pro- duction unit shall be as follows: Usable frequency response shall extend from

40 Hz – 20 kHz. The loudspeaker shall be available in 64 W transformer and 8 Ohm models. Taps shall be nominally 4 W @ 70.7 V (8 W @ 100 V), 8 W @ 70.7 V (16W @

100 V), 16 W @ 70.7 V, 64 W @ 100 V and

64 W @ 70.7 V (not used in 100 V systems). The frequency-dividing network shall have a crossover frequency of 2.4 kHz. Rated power capacity of the components and network shall be at least 100 Watts continuous RMS power.

Technical data, EASE™ plots, SoundTubeSPEC™ software & product downloads available at www.soundtube.com