Troubleshooting
| ● Check that the signal cable is properly connected to the |
Image vibrates on the screen | graphics board or PC. |
Vertical flicker appears |
|
| ● Press the Auto button. |
| ● |
| Eliminate the vertical bars using the More Settings of Phase/ |
| Clock in OSD Main Controls. |
Horizontal flicker appears
● Press the Auto button.
●
Eliminate the vertical bars using the More Settings of Phase/
Clock in OSD Main Controls.
The screen is too bright or too dark
An after-image appears
An
Green, red, blue, dark, and white dots remains
●Adjust the contrast and brightness on OSD Main Controls. (The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer).
●If an image remains on the screen for an extended period of time, it may be imprinted in the screen and leave an after- image. This usually disappears after a few hours
●This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal. The after- image will disappear after a peroid of time.
●The remaining dots are normal characteristic of the liquid crystal used in today’s technology.
For further assistance, refer to the Consumer Information Centers list and contact your local Philips distributor.
RETURN TO TOP OF THE PAGE
file:///D/EDFU/LCD/170C7/manual/english/170c7/safety/saf_troub.htm (2 of
