Settings
42
Using GAP-standard complianceThe GAP standard guarantees that all models of DECT GAP handsets and base stations comply with a
minimum operating standard.
Your ONIS 200 HANDSET and BASE STATION comply with this standard.
Configuring line settingsDial mode
This function allows you to choose the dial mode:“Tone” or “Pulse” (decadic dialling).
If you intend to connect your extension through a PABX,you can change the following two parameters.
The registration code is indicated
on the label underneath
the base station(RC ...).
●To use your ONIS 200 HANDSET with a
GAP-standard base station that is a different
model,first follow the procedure described in
the manufacturer's operating instructions,then
continue from step of the procedure used
to add an ONIS 200 HANDSET described on
page 41.
●To add another handset model to your ONIS
200 BASE STATION,switch the ONIS 200
BASE STATION off and on,then follow the pro-
cedure described in the manufacturer's instruc-
tions.
2
LNOTE:
Minimum functions available to ONIS 200 HANDSETS and/or BASE STATIONS registered with different-model handsets and
base stations are:obtaining a line, receiving a call and dialling.
Go to “Dial mode” under the “Line settings”
in the “Settings” menu and select OK|.
Scroll to select the dial mode you want and
select OK|.
2
1
√Tone
BACK OK
Dial mode:
Reglages 19/04/01 14:44 Page 42