3
Manual storeOther settings in the menu
This menu is used to store the programmes
one at a time.
&Press the Hkey.
éWith the îkey,select Manual Store and
press ¬.Use the îÏ keys to select a
setting and the Ȭ keys to adjust.:
“System:select Europe (automatic detection*)
or West Europe(BG standard), East Europe
(DK standard),UK (I standard) or France (LL’
standard).
* Except for France (LL’standard), you must select
choice France.
‘Search:press ¬.The search starts. Once a
programme is found,the scanning stops. Go to
the next step.If you know the frequency of the
required programme,this can be entered
directly using the 0to 9keys.
If no
programme is found,see Tips chapter at the end
of the instruction for use.
(Program No.:enter the required number
with the Ȭ or 0to 9keys.
§Store:press ¬. The program is stored.
èRepeat steps ‘to §for each programme to
store.
!To quit the menus, press d.
&Press the Hkey.
éUse the îÏ keys to select a setting and
the Ȭ keys to adjust.:
• Brightness: this changes picture brilliance.
• Colour: this changes the intensity of the colour.
• Contrast: this changes the difference
between the light and dark tones.
•
Sharpness:this changes the picture definition.
• Balance (only available on stereo versions):this
balances the sound on the left and right speakers.
•
Auto Store:to start automatic search for all
programmes available in your region.Then,
you need to use the Manual Storemenu to
renumber the programmes (see p.1).
To quit or interrupt the search, press H.
•
Manual Store:see top of page.
“To quit the menus, press d..
System Europe
Æ
Search 224 MHz
Manual Store
Æ
Brightness
!
-+
Brightness
Colour
Contrast
Sharpness
Balance
Auto Store
Manual Store
Connecting peripheral equipment
Use the euroconnector socket located at the back of the set or the
front AV connections (when available).Certain versions are equipped
with 2 euroconnectors EXT1 and EXT2.
To select connected equipment, press several times the nkey.
Most equipment (decoder,VCR) carries out the switching itself.
Headphones socket (only available on certain versions)
When headphones are connected,the sound on the TV set will be cut.
The @
”
#keys are used to adjust the volume level.
The headphone impedance must be between 32 and 600 Ohms.
The keys on the TV set
The TV set has 4 keys :
VOLUME - + (- ”+) and PROGRAM - + (- P+).
To access or exit the menus, press simultaneously the ”- and ”+
keys.Then use the - P+ and - ”+ keys to select and adjust.
Other functions