Remote control keys
Surround Sound
To activate / deactivate the surround sound effect. In stereo, this gives the impression that the speakers are further apart.
VCR key *
Screen information / permanent no.
To display / clear the program number, name (if it exists) and audio mode. Press the key for 5 seconds to activate permanent display of the number.
Menu To call up or exit the menus.
Cursor These 4 keys are used to navigate through the menus.
Volume
To adjust the sound level
Mute To mute or restore the sound.
Teletext keys (p.4)
or VCR keys *
.
%∫ ı
™› Ó Ÿ 
TV
VCR
Ë ` ∏ 
SMARTRADIOSMART
-
ª
MENU | ¤ |
+ +
”- [ - P
· ∆ Ê Æ
1 2 3
Standby
Lets you place the TV set on standby.To turn on the TV, press P @ @, b, 0 to 9 .
Teletext keys (p. 4), and VCR keys
16:9 Format (p. 5).
unused keys.
Smart picture and sound
Used to access a series of predefined picture and sound settings.
The personal position relates to settings selected from the menus.
Teletext (p. 4)
Program selection
To access the next or previous programme.The number, (name) and sound mode are displayed for a few moments.
For some programs, the title of the program will be displayed at the bottom of the screen.
Digit keys
| 4 | 5 | 6 |
| 7 | 8 | 9 |
Selection of EXT | Y | 0 | ù |
|
socket (p.3)
Direct access to the programmes. For a 2 digit programme, enter the 2nd digit before the dash disappears.
Sound mode
Used to force programmes in Stereo and Nicam Stereo to Mono or, for bilingual programmes, to choose between Dual I or Dual II.
The Mono indication is red when in forced position.
*VCR key
The remote control lets you control the main functions of the VCR.
Press and hold down the VCR key located on the side of the remote control, then press one of the keys to access the VCR functions: b % ∫ H îÏ È¬ P @# · ¢ Ê Æ 09
The remote control is compatible with all VCRs using the RC5 standard.
2
