25

HOW TO USE THE SURF CONTROL

Alist or series of previously viewed channels
can be selected with the SURF button on your
remote control. With this feature, you can easily
switch between different TVchannels that current-
ly interest you. The SURF control allows you to
set up to ten channels in its quick viewing list.
1Press the CHANNEL(+) or (–) button
(or the numbered buttons) to select a chan-
nel to add to the SURF list.
2Press the SURFbutton on the remote
control. The onscreen display may read,
“SURF LIST EMPTY.” The number of
the current channel will be shown with
“ADD?” to the right.
3While the SURF list message or the SURF
channel list appears on the screen, press
the CURSOR RIGHTbutton to add the
present channel to the SURF list.
4If you want to delete the present channel
from the SURF list, press the CURSOR
RIGHT button again.
Repeat steps 1 through 3 to add more channels
(up to 10) to the SURF list.
Along with regularly programmed chan-
nels, the external video source connections
can be added to the SURF list. This means
that the external A/V Jacks and their chan-
nels can be added to your SURF list. Use
the Source button to tune their channel and
use the same steps described on this page
to add those channels to the Surf list.
HELPFUL HINT
Surf List
3 Add?
Surf List Empty
ÑÉ
Surf List
3 Delete?
ÑÉ
Surf List
3
5 Add?
ÑÉ
Surf List
3
5 Delete?
ÑÉ
3
4
1
2
2
4
HOW TO USE THE PIXEL PLUS CONTROL
PixelPlus™ creates near high-definition (HD)
performance inside the TV on the basis of a reg-
ular input signal. By doubling the number of
lines and the number of pixels per line,
PixelPlus™ enhances both regular broadcasts
and DVD input for unparalleled sharpness and
depth. You
can view the difference in a regular
broadcast signal and one enhanced with
PixelPlus™ by following the steps below.
1Press the Pixel Plus button on the remote
control. APixel Plus demo will appear on
the screen.
The left hand side of the screen show the
picture without Pixel Plus enhancement
while the right side is shown with the Pixel
Plus control On.
2
Press the Pixel Plus button on the remote
control to remove the demo screen.
Note: You cannot turn Pixel Plus™ off, it is a fea-
ture of the TV. You can only see the difference in
a signal with or without PixelPlus™.
Pexel Plus Demo
1
2
Pixel Plus Demo
Off On