Philips 24PW6005/58 manual Remote control keys, Key not used

The remote control keys

key not used

Sleeptimer To select the length of time before the set automatically switches to standby (from 0 to 240 minutes)

Select EXT sockets

Press several times to select EXT1, EXT2 and on certain models EXT3 and S-VHS2.

Mode selector (p. 13) To activate the remote control in TV,VCR (video recorder) or DVD mode.

Smart sound controls To access a series of settings:

VOICE, MUSIC,THEATRE and return to PERSONAL

Menu

To display or exit from the menus

Cursor These 4 keys are used to move within the menus or to have direct access to the 16:9 formats (p 10).

Volume

To adjust the sound level

Mute

To disable or enable the sound.

Teletext features (p. 9)

Sound mode To switch from STEREO to MONO or to choose between Dual I and Dual II for bilingual transmissions.

For TV sets fitted with NICAM reception, depending on the transmission, you can switch from NICAM STEREO to MONO or choose between

NICAM DUAL I, NICAM DUAL

IIand MONO. When the sound mode is switched to MONO, the indication is displayed in red.

Contrast +

To activate / de-activate the automatic contrast adjustment system (the dark areas are made darker whilst maintaining the detail).

Standby

To set the TV to standby mode. To switch the TV set on again, press P @ # or 0 9.

key not used

Numerical keys

For direct access to programmes. For a 2 digit programme number, the 2nd digit must be entered before the dash disappears.

Smart picture controls To access a series of settings:

RICH, NATURAL, SOFT, MULTIMEDIA and return to

PERSONAL.

Incredible Surround

To activate / deactivate the surround sound effect. In stereo, this gives the impression that the speakers are further apart. In mono, a stereo spatial effect is simulated.

Selecting TV programmes To move up or down a programme.The number, (the name) and the sound mode are displayed for a few seconds.

For some TV programmes the title of the programme appears at the bottom of the screen.

Screen information

To display / remove the programme number, the name (if it exists), the time, the sound mode and the time remaining on the timer. Hold down for 5 seconds to permanently display the programme number on the screen.The volume level and the Smart control adjustments are then displayed each time it used.

Previous programme

To access the previously viewed programme.

16:9 formats (p. 10)

3