Philips 25PS40S99 manual HOW to Automatically Program TV Channels

HOW TO AUTOMATICALLY PROGRAM TV CHANNELS
our TV can automatically set itself
Yfor local area (or Cable TV) chan-
nels. This makes it easy for you to
select only the TV stations in your area
when the CHANNEL (+), (–)buttons
are pressed.	Main
Note: Make sure the antenna or cable	Picture	Brightness
signal connection has been completed	Sound	Color
before AUTO PROGRAM is activated.	Features	Picture	Main
	Install	Sharpness	Picture	Language
		Tint
			Sound	Tuner Mode
		More...
Press the MENU button on the			Features	Auto Program
remote to show the on-screen menu.			Install	Channel Edit
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the on-screen menu until the word
INSTALL is highlighted.
Press the CURSOR RIGHT		4	Install
			Language
button to display the INSTALL menu	1	2	Tuner Mode
features.		6	Auto Program
			Channel Edit
Press CURSOR UP ▲ or DOWN
▼ buttons to scroll the Install features
until the words AUTO PROGRAM are		3	5
highlighted.
Press the CURSOR RIGHT	2
button to start the Auto Program scan-			Auto Program
	4		Channel	12
ning of channels. Auto Programming
will store all available channels in the
TV’s memory then tune to the lowest
available channel when done.			Auto Program
When finished, press the STATUS			Channel	13
/EXIT button to remove the menu
from the TV’s screen.
			Auto Program
			Channel	14
SMART HELP
Try it out. Press the CHAN-
NEL (+), (–) buttons and see
which channels have been added to the
TV’s memory.
If you want to delete any unwanted chan-
nels from the TV’s memory, refer to the
section on adding and deleting channels
(Channel Edit) on the next page.
		12