Philips 3139 125 29371 manual Connect one end of the S-VIDEO, Connect other end of the S

USING THE S-VIDEO INPUT JACKS						Let's
						Look
						Inside!
he S(uper)-Video connection on the
Trear of the TV can provide you with
better picture detail and clarity for the			IF YOU ARE USING A
playback of accessory sources such as
			MONO DEVICE, USE
DBS (digital broadcast satellite), DVD
			ONLY THE AUDIO
(digital video discs), video games, and			L/MONO JACK.
S-VHS VCR (video cassette recorder)
tapes than the normal antenna picture	1
connections.
NOTE: The accessory device must		BACK OF TV
have an S-VIDEO OUT(put) jack in	Monitor out	AV1 in	AV2 in
order for you to complete the connec-
	75 V	COMPONENT VIDEO INPUT
tion on this page.	VIDEO
	L/	Y
	Mono
	AUDIO	Pb	S-VIDEO
Connect one end of the S-VIDEO
CABLE to the S-VIDEO jack on the	R	Pr
back of the TV. Then connect one end					S-VIDEO
the AUDIO (red and white) CABLES						2
to the AV2 in AUDIO L and R(left and					CABLE
right) jacks on the rear of the TV.
Connect other end of the S-			AUDIO IN
			(RED/WHITE)
VIDEO CABLE to the S-VHS (S-			OUT	OUT	S-VHS
Video) OUT jack on the back of the
	5
VCR. Then connect the other ends of					ANTENNA
			R AUDIO L	VIDEO	IN
the AUDIO (red and white) CABLES
to the AUDIO (left and right) OUT			IN	IN	ANTENNA
					OUT
jacks on the rear of the VCR.
					BACK OF VCR
Turn the VCR and the TV ON.
Press the CH + or – buttons on the			6
remote to scroll the channels until
SVHS appears in the upper left corner
of the TV screen.
Slide the TV/VCR/ACC switch to			3		VCR
the VCR position.
					EQUIPPED WITH
				S-VHS (S-Video) JACKS
Now your ready to place a prere-	VOL
corded video tape in the VCR and
press the PLAY ▶ button.
				SVHS
			4

SMART HELP

The S-VIDEO and VIDEO AV2 in(puts) are in parallel. The

S-VIDEO input is dominant when in use. If separate video signals are con- nected to the S-VIDEO and VIDEO AV2 in(put), the signal from the VIDEO AV2 in(put) will not be usable.

Note: SVHS will appear as a valid channel option only if a SVHS device is connected to the S-Video Input Jack. If the device is connected to the AV2 Video In, the channel will appear as AV2.

25