4 Connecting peripheral equipment
Equipment such as VCR, Laser disc player, VCD etc. could be connected to the video and audio (AV) sockets at the back of the TV. Switch off the TV and equipment before making any connection.
Connection for playback
AV 2 | AV 1 | Monitor |
in | in | out |
VIDEO
| L |
| AUDIO |
R | |
|
VCR 
VCR
OROR
VCD
Laser disc
player
AV 2 | AV 1 | Monitor |
in | in | out |
VIDEO
L
AUDIO
R
VCR
1.Connect to AV sockets
You may choose to connect up AV1 in or AV2 in or both.
4connect the corresponding sockets of the
equipment to that of the TV.
5to view the playback, select the first AV channel (if connection is made to sockets
at AV1 in) or the second AV channel (if connection is made to sockets at AV2 in).
Note: For mono equipment, connect to the VIDEO and L sockets only.
2.Connect to S-Video sockets
If you have a
4connect the corresponding socket of the
equipment to that of the TV.
5to view the playback, select the Y/C channel.
Note: If both the
VIDEO 2 VIDEO 1 MONITOR
in in out
75Ω
g | VIDEO |
L
AUDIO
R
VCR
3.Connect to aerial socket
(only for VCR)
The playback on your VCR is considered a TV channel by your TV if you connect via the aerial socket. You must tune in to your VCR’s test signal and assign a channel number to it. Refer to your VCR’s instruction manual for more details.
4connect the RF cable to the VCR’s “RF in” and connect the “RF out” of the VCR
to the aerial socket of the TV.
4select the channel and tune in to to your
VCR’s signal.
5to view the playback, select the channel.
4 | 7/6/00, 3:10 PM |
