______________________
Store Settings
To confirm the changes the settings has to be stored.
select [Store] > [Confirm] to save the changes.
_______________________
Smartloader
Place a USB Memory stick in the side USB connector
Layer 1 | Layer 2 | Layer 3 |
Smartloader | Smartloader to TV | OK |
TV will read and store Cloning data from USB stick
Layer 1 | Layer 2 | Layer 3 |
Smartloader | TV to Smartloader | OK |
TV will store Cloning data to USB stick
2.TV Functionality Setup Mode
instruction
To select specific TV functionality settings (i.e. Channel settings, picture settings .etc) this can be done in TV Setup Mode only.
To enter the TV Setup mode, it is necessary to disable the Professional mode. To do this, change the setting of BDS Mode in the BDS Mode Setting menu to ‘off’, and store this setting.
Layer 1 | Layer 2 | Layer 3 |
BDS Mode Setting | BDS Mode | Off |
Store Settings | [OK] |
|
After this the TV initiates a restart and will switch to TV Setup mode.
Now the Professional Setup Remote Control in RC6 Guest mode (press on the Professional Setup RC the RC6 Guest button) and the TV Remote control can be used to make the required setting.
The available options are described in the TV Functionality Set reference DFU.
The TV Functionality Set reference to match a hospitality TV is the following:
Hospitality Set reference | TV Functionality Set reference |
32HFL7406D/1032PFL7406H/12
40HFL7406D/1040PFL7406H/12
The TV Functionality Set reference DFU is available via the Philips Hospitality Website: www.philips.com/hotelTV
After making the proper settings, activate the Professional Setup Remote Control mode (press the RC5 Setup button) and pressing Home/Menu to active the BDS Setup Menu.
Layer 1 | Layer 2 | Layer 3 |
BDS Mode Setting | BDS Mode | On |
Store Settings | [OK] |
|
After this the TV initiates a restart and will switch to Standby.
Remote Control Alignment
Professional Setup RC | TV RC |
Home [RC6 Guest] |
|
|
|
|
|
|
|
|
|
|
|
|
|
8