32

Access CAM services

1 After inse rting and activ ating the CAM,
press MENU.
2 Press to select [Setup] >
[Features] > [Common interface].
Applications provided by the digital TV »
service operator appear on the screen.
Note
This menu op tion is available onl y if the CAM •
is inser ted and activate d correctly.
Use Philips EasyLink
Your TV supports Philips EasyLink, which
enables one-touch play and one-touch standby
between EasyLink-compliant devices.
Note
Compliant d evices must be connec ted to your •
TV via HD MI.

Enable or disable EasyLink

Note
Do not enabl e Philips EasyLin k if you do not •
intend to use i t.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Preferences] >
[EasyLink].
3 Select [On] or [Off].

Use one-touch play

1 After ena bling EasyLink, p ress play on
your device.
The TV automatically switches to the »
correct source.
Use a Conditional Access Module
A Conditional Access Module (CAM) is
provided by digital TV service operators to
decode digital TV channels.
Note
If required, refer to documentation from your •
operato r on how to insert a sma rt card into
the Conditional Access Module.

Insert and activate a CAM

Caution
Be sure to fol low the instruc tions described •
below. Wrong ins ertion of a CAM may
damage both t he CAM and your TV.
1 Switch off th e TV.
2 Following the d irections printed o n the
CAM, gen tly insert the CA M into the
COMMON INTER FACE at the side of
the TV.
3 Push the CA M in as far as it will go.
4 Turn on the TV and w ait for the CAM
to be activa ted. This may take several
minutes. D o not remove the CAM from
the slot when i n use — removing the
CAM will deactivate digital services.
EN
Downloaded From TV-Manual.com Manuals