![](/images/new-backgrounds/1128881/12888141x1.webp)
Installation | 7 | Source | 8 |
Language |
| TV |
|
Autoprogram |
| AV1 |
|
Source |
| AV2 |
|
Clock |
| AV3 |
|
Weak channel installation |
| HDMI1 |
|
Current software info |
| HDMI2 |
|
Reset AV settings |
| Side |
|
|
| PC |
|
Info |
|
|
|
HDMI2 HDMI1 VGA | L |
|
|
|
|
|
|
VIDEO | Y | Pb | Pr | L | R | AV1 | |
| IN |
|
|
|
|
| |
PC IN | R |
|
|
|
|
|
|
Y | Pb | Pr | L | R | AV2 | ||
|
|
|
|
|
|
| |
| AV3 |
|
|
|
|
|
|
HDMI |
|
|
|
|
|
|
|
DVI |
| AV3: |
|
|
|
|
|
|
| Audio L/R |
|
|
|
L
DVI
R
Source
This menu allows you to identify the accessory devices you have connected to the external inputs/outputs.
1 | Select Source in the Installation menu. |
2Press the cursor right to enter the list, and press up/down key to
the selected input.
3Press OK button to confirm.
Analog Audio In
If your accessory device has a DVI output connector, only the video signal is transmitted in digital format. To input an audio signal, please connect the analog audio L and R outputs to the TV’s L and R AV3 audio input plugs.
Digital Audio Out
In addition to accepting audio input through HDMI, the TV can output Digital audio through the DIGITAL AUDIO OUT (SPDIF OUT) connector to an external amplifier or receiver.
If your amplifier or receiver has a matching connector for Digital Audio In, you can connect it with a single cable to the TV’s
DIGITAL AUDIO OUT (SPDIF OUT). See Cover and Connection.
Installation | 7 | Clock |
|
Language |
|
|
|
Autoprogram |
| : | AM |
Source
Clock
Weak channel installation
Current software info
Reset AV settings
Info
Clock
| This allows you to use your TV as a clock. |
1 | Press the MENU button on the remote control. |
|
2Use the cursor down to select Installation in the Settings menu.
3 Press the cursor right to enter the list, and press up/down key to set the time. (hour/ minute/ AM or PM)
4 Press OK button to confirm.
14