4.2.5Manual installation of analogue channels 1/2
Analogue TV channels can be manually tuned-in channel
by channel.
To start the manual installation of analogue channels,
press h > Setup > Installation > Channel installation >
Manual install - analogue.
Follow each step in this menu.
You can redo these steps until you have all available
analogue TV channels.
1 System — If you have your own antenna, you need
to select the country or part of the world where the TV
channel comes from. If you receive TV channels via a cable
system, you only need to select the country or part of the
world once.
2 Find channel — Search for an analogue TV channel. The
search starts automatically but you can manually enter a
frequency. If the channel reception is bad, select Search
next to search again. Select Done and press OK if you want
to store this TV channel.
...
Downloaded From TV-Manual.com Manuals