4.2.2Update channels 1/2

When the TV was switched on for the first time, a full
installation of channels was performed.
You can set the TV to add or remove digital channels
automatically. You can also manually start the channel
update.
Automatic update
To set the TV to update digital TV channels automatically,
leave the TV in standby mode. Once a day, at 6 AM, the TV
updates earlier found channels and stores new channels.
Empty channels are removed from the Channel overview.
If a channel update has been performed, a message shows
at TV start up.
If you do not want this message to appear, select No in
h > Setup > Installation > Channel installation > Channel
update message.
...
Downloaded From TV-Manual.com Manuals