Philips 7349XL, 7325XL manual Once a Month Razor Heads

16	ENGLISH
	C 6	Open Razor Head assembly again and
		leave open to air dry.
	NOTE: Do not wipe or dry the shaving heads
	with a towel or tissue.This could damage the
	shaving heads.
	C 7	If the shaving unit becomes detached from
		the razor, you can easily reattach it.
	8	You may also clean the hair chamber
		without water by using the supplied brush.

Once A Month: Razor Heads

Do not mix up the cutters and combs as the shaving performance may be adversely affected for several weeks before optimal shaving performance is restored.

		1	Turn razor OFF, remove the charging plug
C			from the outlet and cord from the razor.
			Press the razor head release button to
		2
	C		open the razor head assembly.
			Turn the black 3-pronged locking bracket
3
			counterclockwise (1) and remove the
			retaining frame (2).

	ENGLISH	17
C 4	Remove and clean one set of cutters and
	combs at a time.
C 5	Separate the cutter from the comb and
	rinse clean under hot water.
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
C 6	Replace the set back into the Razor Head
	Assembly so that the “wings” on the comb
	fit within the brackets located towards the
	center of the Assembly.
The set will only fit into the Razor Head Assembly
if the ‘wings’ are between the brackets. Make sure
that the two pointy edges of the head fit exactly
into the recesses.

7	Repeat the process for the other two sets
	of cutters and combs.
8	Replace the frame.
C 9	Press down (1) and turn the black
	3-pronged locking bracket clockwise (2)
	until it locks into place.