PhotoFrame Firmware Upgrade Instructions
Applicable models
Firmware version
Release date
Release notes
7FF3FPB, 7FF3FPW
123
December 12, 2008
- Preloaded baby photo is deletable
Important notice before updating
! The firmware upgrade process will remove all photos currently stored on PhotoFrame. ! Please make sure all photos on PhotoFrame are properly backed up before updating.
Please follow the steps below to upgrade the PhotoFrame firmware.
1Format SD (Secure Digital) card
2Copy all files from the ‘Firmware’ folder into the root folder of the SD card (The root folder is the ‘highest’ folder in hierarchy, for example F:\)
3Make sure PhotoFrame is powered Off
4Insert SD into PhotoFrame with the new firmware into the PhotoFrame
5Push the Power button to power on the PhotoFrame
6The firmware upgrade will start automatically
Warning: Upgrade takes about 1 minute.
! During the upgrade do not disconnect power, remove the memory or make new ! connections. Otherwise this may harm your PhotoFrame.
7When "Please reboot system!" shows, firmware upgrade has finished
8Remove the memory from the PhotoFrame
9Power Off the PhotoFrame and Power On afterwards by pushing the Power button
10The upgrade has completed
You can check the new firmware version via Setup → Status → Firmware.
