32ENGLISH
C
4Thoroughly rinse the pump unit under hot tap water for at least 30 seconds.
Make sure all residual shaving conditioner lotion is removed.
5Carefully place the pump unit back into the refill & charge stand and reattach the back panel.
6Put the shaving conditioner bottle and razor back into the refill & charge stand (see ‘Preparing Refill & Charge Stand For Use’).
Replacing Cartridges and Shaving Conditioner Refill Bottle
|
|
| ENGLISH 33 |
| C |
| Insert the hinge at the top of the new |
|
| ||
2 | |||
|
|
| shaving conditioner cartridge into the slot |
in the rim of the razor back (1). Then press the bottom part of the cartridge with your thumb (2) to attach the cartridge to the razor. You will hear a ‘click’.
3The shaving conditioner cartridge is now ready to be filled (see ‘Charging and Refilling the Razor’).
NIVEA FOR MEN Shaving
Conditioner Bottle
◗ Only use NIVEA FOR MEN Shaving |
Conditioner (Model HS800) with the refill |
◗For hygienic reasons, it is recommended to replace the shaving conditioner cartridge each time you start a new shaving conditioner bottle.
◗A new empty cartridge is supplied with each new NIVEA FOR MEN Shaving Conditioner bottle (Model HS800).
Shaving Conditioner Cartridge
C1 Remove the shaving conditioner cartridge 
from the back of razor.
& charge stand. Any other lotion may cause |
damage to your razor. |
C1 Remove the tab of the NIVEA FOR MEN shaving conditioner bottle.
C2 Turn the cap on the shaving conditioner bottle clockwise.
The cap moves down and the shaving conditioner nozzle appears.
3Turn the cap of the refill & charge stand
| counterclockwise to remove cap. |
C | 4 Place the shaving conditioner bottle in the |
| docking hole of the refill & charge stand |
| with the nozzle pointing down. |
