Philips 8170XL manual Once a Month Razor Heads

18ENGLISH

5Close the Razor Head Assembly and shake off excess water.

C 6 Open Razor Head assembly again and leave open to air dry.

NOTE: Do not wipe or dry the shaving heads
with a towel or tissue.This could damage the
shaving heads.
C 7	If the shaving unit becomes detached from
	the razor, you can easily reattach it.
8	You may also clean the hair chamber
	without water by using the supplied brush.

Once A Month: Razor Heads

Do not mix up the cutters and combs as the shaving performance may be adversely affected for several weeks before optimal shaving performance is restored.

1Turn razor OFF, remove the charging plug

from the outlet and cord from the razor.

C 2 Press the razor head release button to open the razor head assembly.

C 3	Turn the wheel counterclockwise (1) and
	remove the retaining frame (2).

ENGLISH 19

C 4	Remove and clean one set of cutters and
	combs at a time.
C 5	Separate the cutter from the comb and
	rinse clean under hot water.

Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
C 6	Replace the set back into the Razor Head
	Assembly so that the ‘wings’ on the comb
	fit within the brackets located towards the
	center of the Assembly.
The set will only fit into the Razor Head Assembly
if the ‘wings’ are between the brackets. Make sure
that the two pointy edges of the head fit exactly
into the recesses.
7	Repeat the process for the other two sets
	of cutters and combs.
8	Replace the frame.
C 9	Press down (1) and turn wheel clockwise
	(2) until it locks into place.
10	Close the Razor Head Assembly.