XtraHS_QSG_VOIP841_UK.qxd 12.07.2007 18:35 Seite 1
What’s in the box
Two 750mAh | Power supply for |
AAA NiMH |
1 Connect
AConnect the charger
2 Install
ARegister the handset
BVerify the signal strength
batteries | charger |
Handset | Battery door | Charger |
Quick start guide | User manual |
B
● Insert the plug of the charger power adapter into the socket on the bottom of the charger.
● Plug the power adapter into your power outlet.
Insert batteries
● Place the 2 rechargeable NiMH AAA batteries, observing their polarities, into the battery compartment on the handset.
● Slide the battery door firmly into place.
Registration allows communication between the base unit and handset(s). If the handset cannot communicate with its base, you will not be able to make any call or use many of the functions and features on the phone.
1.Press | Reg. | . Register shall be | |||
| |||||
highlighted. | |||||
2.Enter the system PIN (Default: | |||||
0000). Use |
| to correct typing | |||
Clear | |||||
errors. | |||||
3.Press |
|
|
| to confirm. | |
Enter | |||||
● Your handset starts searching for | |||||
the base. | |||||
4.Press | on the base unit until the | ||||
two indications turn off. | |||||
● If registration is successful, the | |||||
The signal icon 
displays the link status between the handset and the base unit.
Signal icon 
:The handset and base unit are linked.They can communi- cate.
No signal icon 
:The handset and base unit have lost link.They are not able to communicate.Take your handset closer to the base unit to reconnect the link.
If you move too far away from the base unit while you are on the phone, you will hear warning tones notifying you that the handset is almost out of range - lost link.Take the handset closer to the base unit or your call will be cut off shortly after the warning.
What else will you need
A VOIP841
CCharge handset
14
● Before first use, put the handset on the charger and charge batteries for 14 hours.
signal icon | displays steadily. |
Tip :
If registration failed, repeat the above procedure.
Note :
The base can register up to 4 handsets, then the base unit registration memory is full. If you attempt to register an additional handset, the registration process will be aborted.
Note :
If your handset has lost link, you will not be able to make or receive any call. In addition, you will not be able to carry out
many of the phone functions and
features.39751 2853111
