![](/images/new-backgrounds/1237407/23740713x1.webp)
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING: Do not open the set as there is a risk of electric shock. Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee.
Problem
–Possible cause
• Remedy
No sound /power
–Volume not adjusted
• Adjust the VOL.
–Batteries dead/ incorrectly inserted
• Insert (fresh) batteries correctly
–Headphones connected to the set
• Disconnect headphones.
Poor radio reception
–Weak radio signal
•For MW, the set uses a
Display does not function properly / No reaction to operation of any of the controls
–Electrostatic discharge
• Switch off and unplug the set. Reconnect after a few seconds.