Note
•• Batteries are not supplied with the accessories.
•• bAt shows on the display when the battery level is low.
1 Open the battery compartment.
2 Insert 2 batteries (type: 1.5V LR6/AA) with correct polarity
3 Close the battery compartment.
Set time
1 Rotate the Third Knob to "SET TIME" to activate clock setting mode.
»»Hour and minute digits blinks.
2 Rotate the First Knob to adjust the hour.
3 Rotate the Second Knob to adjust the minute.
4 Press OK on the First Knob to confirm.
»»The setting time is displayed.
5 Rotate the Third Knob to CLOCK after setting.
»»The hour and minute digits stops blinking.
Note
•• When an iPod/iPhone is connected, the clock radio synchronizes time from the iPod/iPhone automatically.
Turn on
The clock radio turns on automatically once your plugged in.
Switch to standby mode
Press SOURCE for 3 seconds to switch to standby mode.
»»The source indicator on the display panel turns off.
EN 6
