Philips AJL308/98 Sleep / Illumination Setup menu, Using Setup menu options, Using the stand

Sleep / Illumination

Setup menu

Using Setup menu options

Sleep

The clock radio has a built-in sleep timer, which enables the set to automatically turn off sound during radio or music playback after a set period of time.

Option 1:

1Press TUNER.

2Press SLEEP until your desired sleep option is displayed.

➜Radio will turn on if radio was previously turned off.

Option 2:

1Press CLOCK or PHOTO/VIDEO to enter respective mode.

2Press MENU.

3Press 1 2 to highlight “General”.

4Press 34 to select “Sleep Timer Music”.

5Press 1 2 to select specific music you like. ➜The set will turn on with the music you

select.

Option 3: using USB/Memory card (SD/MMC)

1Repeat steps 1-8 described in “Listening to music”.

2Press SLEEP until your desired sleep option is displayed.

To deactivate sleep function

When sleep is activated, is display.

•Press SLEEP until “Off ” is displayed.

Illumination brightness

The LCD brightness can be adjusted manually and automatically.

Manually adjusting

•Press REPEAT ALARM / BRIGHTNESS CONTROL once or more to cycle screen brightness through 4 levels.

Automatically adjusting

To avoid strong light emitting from the unit at night time, the auto dim function can be used to adjust the brightness to the lowest level automatically.

1Press MENU.

2Press 1 2 to highlight “General”.

3Press 34 to select “Auto Dim Timer”.

4Press 1 2 to select “On”.

5Press 34 to select “Auto Dim - Start”.

6Press 1 2 to select the time that auto dim will start.

7Press 34 to select “Auto Dim - End”.

8Press 1 2 to select the time that auto dim will end.

•When auto dim is set, during auto dim time span, the LCD brightness will be auto adjusted to the lowest level. Press any button to increase the brightness and it will last 10 seconds.

Using the stand

The set is equipped with a stand on the bottom panel.To set the set for a different viewing angle take the stand out, then place it back by reversing (see the figure below) the side of the stand.

The setup menu offers you advanced fea- tures.

1Press MENU.

➜The menu appears.

2Press 1 2 to select “General”.

3Press 3 4 to select an item.

4Press 1 2 to select an option under the item.

4After finishing the setting, press CLOCK, TUNER, PHOTO/VIDEO or MUSIC to exit the setup menu.

	Setup			Option	Description
Language		English/Français/Deutsch/Español			Select a desired on screen display
					language
Brightness		-3~3			Select a brightness value
Auto Dim Timer		Off/On			Turns on or off auto dim for LCD
					brightness.
Auto Dim - Start		21: 00			Set the start time for auto dim
Auto Dim - End		7: 00			Set the end time for auto dim
Wall Paper		Blue/Green/Red/Purple			Select different color for LCD
					background
Sleep Timer Music		3 music files are preset			Select one file for sleep function
Picture Display		Slideshow mode/Browse mode			Select different mode to display picture
Slideshow Sequence		Sequential/Random			Select different slideshow sequence
* Slideshow Effect		None/Random /16 effects available			Select different slideshow effects
Slideshow Frequence			5 Seconds/10 Seconds/ 30 Seconds/		Select different slideshow intervals
			1 Minute/ 5 Mintues/30 Minutes
			1/ Hour/ 2 Hours
Display Format		Wide screen/Normal			Select picture display format
File Information Display		Off/On			Turns on or off file name display
Video Display		Playback Time/Remain Time			Select different video time to be
					displayed
	DivX VOD				Press OK to get DivX registration
					code.
					Press OK to restore to the factory
	Restore Default		Reset
	settings				default settings.

* = To turn on slideshow effect, you must select slideshow mode in “Picture Display”.