20English
1
2
3
4
5
Disconnect the shaver from the mains or remove it from the charging stand (AT940 only).
Let the shaver run until it stops.
Undo the screws in the back of the shaver and in the hair chamber.
Remove the front panel and the back panel.
Bend the 6 hooks aside and take out the power unit.
Be careful, the hooks are sharp.
6Remove the battery.
Be careful, the battery strips are sharp.
Do not connect the shaver to the mains again or put it back into the
Guarantee and service
If you need service or information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre toll free at
Guarantee restrictions
The shaving heads (cutters and guards) are not covered by the terms of the international guarantee because they are subject to wear.
